Setting The Clock; Setting The Timer - Aiwa CSD-EL50 Operating Instructions Manual

SETTING THE CLOCK
SETTING THE TIMER
2-,
1 ... .... .
h
1
2
3
Press
the CLOCK button.
(12-hour standard)
Turn the VOLUME/TIMER control to adjust the
clock.
For quick adjustment, turn the control quickly.
Press the ENTER button to complete the
setting.
@on
the display disappears and the clock starts from
00 seconds.
To display the current time
Press the CLOCK button.
To return to the operation display, press the CLOCK button
or one of the function buttons.
To
switch to the 12/24-hour standard
While the clock is displayed, press the button.
Setting the clock with the remote control
1 Press the CLOCK button while pressing the SHIFT
button.
2 Press the < or ~ button to adjust the clock.
For quick adjustment, keep the button pressed.
3 Press the 1I SET button to complete the setting.
If the clock display flashes while the power is off
This is caused by a power interruption. The current time
needs to be reset.
If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be
reset.
The unit can be turned on at a s~ecified time everv dav with
the built-in timer.
. .
Preparation
Make sure the clock is set correctly.
1
2
3
4
5
6
Press the TIMER button once.
Turn the VOLUME/TIMER control to adjust the
timer-on time.
Press the ENTER button to designate the timer-
on time.
Flashing 0 on the display stops.
Prepare the source.
To listen to a CD,
press the CD button and load the
disc.
To
listen to a tape, press the TAPE button and insert
the tape into deck 1 or 2.
To listen to the radio, press the TUNER button and
tune in a station.
Turn the VOLUME/TIMER control to set the
volume.
Press the POWER button to turn the unit off.
@ remains on the display (timer-standby mode).
When the timer-on time is reached, the unit turns on and
play begins with the selected source.
The unit will turn off automatically after 180 minutes.
To check the timer-on time
Press the TIMER button. The timer-on time is displayed with
@l flashing.
After checking the time, press the ENTER button to restore
the display.
16
ENGLISH