Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Aiwa CSD-NS1
Summary of Contents for Aiwa CSD-NS1
- Page 1 OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI 8B-CH1-903-01 010325ACK-I-IN CSD-NS1 DIGITAL AUDIO SYSTEM SISTEMA DE AUDIO DIGITAL SYSTÈME AUDIO-NUMÉRIQUE English : See page 2. Español : Ver la página 14. Français : Voir page 26.
- Page 2 (you will find it on the rear of the unit) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty. Model No. Serial No.
-
Page 3: Specifications
4 Extension cord - To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug. 5 When not in use - Unplug the AC power cord from the AC outlet or remove all the batteries if the unit will not be used for several months or more. -
Page 4: Power Supply
Power supply Using on AC house current Connect the AC cord as illustrated below. 1 to the AC inlet of supplied AC cord The rated voltage of the unit is 120 V AC. CAUTION Use only the supplied AC cord. Use with other cords may result in the risk of fire. -
Page 5: Remote Control
Remote control Insert two R6 (size AA) batteries. R6 (AA) • When the reach of the remote control signal is less than 5 meters (16 feet), replace the batteries. • Remove the batteries if the remote control is not going to be used for a long time. The remote control may not operate correctly when: - The unit is exposed to intense light, such as direct... -
Page 6: Tuner Operation
POWER 6STANDBY/ ON d PLAY / DIR / PRESET a PAUSE / SET r, t PHONES TUNER OPERATION Press * TUNER/BAND repeatedly to select the desired band. The power is turned on and the previously tuned station is received. * or BAND on the remote control Press r, t (TUNING f -, + g) to select a station. -
Page 7: Sound Adjustment
DISPLAY BAND c PLAY r, t PRESETTING STATIONS You can preset up to 15 stations in each band. Select a station. Press * a PAUSE/SET once so that “MEMO” flashes to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band. - Page 8 POWER 6STANDBY/ ON d PLAY / DIR / PRESET s STOP/ CLEAR a PAUSE / SET r, t CD OPERATION Press CD. The power is turned on. Press CD OPEN/CLOSE to open the disc compartment. Set a disc with the printed side up, then press CD OPEN/CLOSE to close the disc compartment.
-
Page 9: Programmed Play
c PLAY r, t REPEAT, RANDOM PLAY A single track or all tracks can be played repeatedly, and all the tracks randomly. Random play can be repeated as well. Operate with the remote control. Repeat play Press REPEAT repeatedly to select : Repeats all the tracks. -
Page 10: Tape Operation
d PLAY / DIR / PRESET s STOP/ CLEAR a PAUSE / SET w REC / REC MUTE r, t TAPE OPERATION Use Type I (normal) tapes only. PLAYBACK Press TAPE/REV MODE. The power is turned on. If the tape has been inserted, play begins. Press TAPE OPEN/CLOSE to open the cassette compartment and load a tape with the exposed side facing forward. - Page 11 r, t RECORDING Load a tape with the side to be recorded on facing up and the exposed side facing forward. Press TAPE/REV MODE to select the reverse mode. : Records on one side only. : Records on both sides. Check that x is displayed, so as to start recording from the side facing up.
-
Page 12: Timer Operation
TAPE / REV MODE, TUNER/ BAND, r, t TIMER OPERATION TIMER PLAYBACK/RECORDING The unit can be turned on at a specified time every day with the built-in timer. Make sure the clock is set correctly. Press TIMER twice for timer play or three times for timer recording so that “5”... -
Page 13: Setting The Sleep Timer
r, t SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. Press SLEEP. Within 4 seconds, turn VOLUME/TIMER to specify the timer-activated period. The time changes between 5 and 180 minutes in 5-minute units. r or t is also available. To check the remaining timer-activated period Press SLEEP once. - Page 14 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful...
Need help?
Do you have a question about the CSD-NS1 and is the answer not in the manual?
Questions and answers