Geeetech Prusa I3 A pro Manual page 3

dexterity, common sense and a thorough understanding of what you are
doing. We have provided detailed instructions to help you assemble it
easily, please download at geeetech.com.
However ultimately we cannot be responsible for your health and
safety whilst building or operating the printer, with that in mind be sure
you are confident with what you are doing prior to commencing with
building or buying. Read the entire manual to enable you to make an
informed decision.
Building and operating involves electricity, so all necessary
precautions should be taken and adhered to, the printer runs on 12V
supplied by a certified power supply, so you shouldn't ever have to get
involved with anything over 12V but bear in mind there can still be high
currents involved and even at 12V they shouldn't be taken lightly.
High temperatures are involved with 3D Printing, the Extrusion
nozzle of the hot end can run about 230° C, the heated bed runs 110° C
and the molten plastic extruded will initially be at around 240° C, so
special care and attention should be made when handling these parts of
the printer during operation.
We wouldn't recommend leaving your printer running unattended,
or at least until you are confident to do so. We cannot be held
responsible for any loss, damage, threat, hurt or other negligent result
from either building or using the printer.
INSTRUCTION:
This Prusa I3 A pro 3D printer is modified and optimized based on
the previous Geeetech Prusa Aluminum I3 3D printer.
GEEETECH
3