Step 1 All The Required Tools Are Included; Step 2 Labels Guide - Prusa Research i3 MK3S+ Manual

STEP 1 All the required tools are included
The kit includes:
Needle-nose pliers (1x)
Philips screwdriver (1x)
Allen key (6x)
The printer's package contains a lubricant, which is intended for maintenance.
No need to use it now the bearings are lubricated. There is a dedicated online
manual on how to clean the printer and apply the lubricant. See
help.prusa3d.com/maintenance-tips
No soldering is required.
No wire crimping is required.
STEP 2 Labels guide
8
1. Introduction
Original Prusa i3 MK3S+ kit assembly
All the boxes and bags including
parts for the build are labelled.
Number (or numbers) in the header
tells you for which chapter you'll
need that bag (or box).