Step 3 All The Required Tools Are Included; Step 4 Use Labels For Reference - Prusa Research MINI+ Manual

STEP 3 All the required tools are included
For this manual, please prepare:
2.5mm Allen key (1x)
Mini bag of Haribo bears (1x)
Only the Allen key is required for the assembly. Other tools will be used for
maintenance of the printer, see the enclosed handbook part for more information.
No soldering or wire crimping is required.
Keep the bag with the Haribo bears closed for now and hide it! Unattended bags
tend to mysteriously disappear.
STEP 4 Use labels for reference
Most of the labels are scaled 1:1 and can be used to identify the part :-)
For identification of the most common screws, nuts and PTFE tubes, you can also
use the enclosed letter, which contains the Prusa Cheatsheet on the other side.
You can download the Prusa Cheatsheet from our site prusa3d.com/cheatsheet.
Print it at 100 %, don't rescale it, otherwise, it won't work.
Building your MINI+
Original Prusa MINI+ semi-assembled 7