Amount Of Energy Produced; Amount Of Energy Produced - Month; Operation Time; Service Menu - Tech Controllers EU-53.3 User Manual

17.

AMOUNT OF ENERGY PRODUCED

This parameter enables the user to check how much energy was produced in different time periods: daily, weekly, monthly,
annually. It also shows how much energy was used.
18.

AMOUNT OF ENERGY PRODUCED - MONTH

This parameter enables the user to check how much energy was produced by the heat pump in different months.
19.

OPERATION TIME

This parameter enables the user to check the operation time of particular devices: heat pump, compressor, anode, heater and
circulating pump.
20.

SERVICE MENU

In order to access the service menu, it is necessary to enter a 4-digit access code. Default code is 1111. If needed, the code may
be changed in the service menu.
21.

STANDBY

This option enables the user to activate the standby mode - the executive devices will be disabled. Anti-free function remains
active - if the temperature drops below certain threshold, the heater will be enabled. It should be used when it is necessary to
disable all devices immediately.
39