Samson 3274 Mounting And Operating Instructions page 7

Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions as
well as the specified hazard statements, warning and caution notes. Furthermore, the operat-
ing personnel must be familiar with the applicable health, safety and accident prevention
regulations and comply with them.
Referenced standards, directives and regulations
The Type 3274 Electrohydraulic Actuator fulfills the requirements of the Directives 2014/30/
EU and 2014/35/EU. The declaration of conformity includes information about the applied
conformity assessment procedure. This declaration of conformity is included in the annex of
these instructions.
The Type 3274 Electrohydraulic Actuator is designed for use in low voltage installations.
Î For wiring, maintenance and repair, observe the relevant safety regulations.
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
− Mounting and operating instructions of the valve (e.g. for SAMSON valves) on which the
electrohydraulic actuator is mounted
u EB 5861 for Type 3260 Three-way Valve
u EB 5868-1 for Type 3214 Globe Valve balanced by a diaphragm
u EB 8012 for Type 3241 Globe Valve, ANSI and JIS version
u EB 8015 for Type 3241 Globe Valve, DIN version
u EB 8026 for Type 3244 Three-way Valve
u EB 8051 for Type 3251 Globe Valve, DIN version
u EB 8052 for Type 3251 Globe Valve, ANSI version
EB 8340 EN
Safety instructions and measures
1-3