Esd Precautions - Cisco ASR 5500 Installation Procedure Overview

Hide thumbs Also See for ASR 5500:

Clearance

Adequate clearance must be maintained at the front and rear of the ASR 5500 chassis to assure proper air

flow and allow maintenance access for the installation, removal and replacement of components. The

recommended clearance is 36 inches (92 centimeters) at the front and rear of the chassis.

ESD Precautions

Electro-Static Discharge (ESD) can cause serious damage to the chassis, its sub-components and/or the cards

installed in the chassis. To prevent damage from ESD, you must take proper grounding precautions before

handling the chassis or any of its components.

The chassis and its mounting brackets are equipped with ESD jacks (see the figure below). Use the jacks in

conjunction with grounding wrist straps when handling the chassis and/or its components. The following

figure shows the location of the jacks.

ASR 5500 Installation Guide

Installation Procedure Overview

Table of Contents