Standards Compliance; Fcc Warning - Cisco ASR 5500 Installation Procedure Overview

Installation Procedure Overview
Before the you can use the ESD jacks on the ASR 5500 chassis and its mounting brackets, you must first
connect the chassis to ground according to the instructions in the Chassis Installation chapter of this document.
Figure 1: Locations of ESD Jacks on the ASR 5500 Chassis
1

Standards Compliance

FCC Warning

This device complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and
Regulations. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
Front ESD jack 2 Rear ESD jack
ASR 5500 Installation Guide
Standards Compliance
5