Wallbe Pro Installation Manual page 13

Installation manual
POWER CLASS 7,4 kW
Construction type
Number of charging
points
Charging capacity
Dimensions
wallbox (H x W x D)
Weight
wallbox
Dimensions
charging column
(H x W x D)
Weight
charging column
Storage temperature
Operating temperature
(compliant with german
calibration law)
Operating temperature
(not compliant with ger-
man calibration law)
Relative humidity
Protection degree
Charging socket / char-
ging cable
Firmly attached charging
cable
Power contactor
Control fuse
Integrated
safety devices
RCD
(must be installed in the
sub-distribution)
Circuit breaker
Authorization
Housing lockable
Energy meter
Protocols
Interfaces
Protection class
Driving eMobility
Wallbox or charging column
1
32 A, 230 V, 1-phase
34 x 34 x 17 cm
approx. 7,5 kg
126 x 57 x 18 cm
approx. 17 kg
-30 to +70°C
-25 to +40°C
-25 to +55°C
30 bis 95% (non-condensing)
IP54
Charging socket type 2
Additionally available:
Cable type 1 or type 2
Type 1 or type 2
2-pole, 40 A
1-pole, B6
RCM-module –
DC fault current detection 6 mA
contactor monitoring
Lock release module
Type A
0,03 A / 40 A
Not integrated
Key switch,
RFID
Optional
Yes
Modbus TCP/RTU
Ethernet RJ45, RS485
1
State according to EN State D with ventilation is not sup-
61851-1
ported.
Rated voltage U 230 V / 400 V AC
n
Rated operational voltage 220/380 - 240/415 V 3N
U
e
500 V
Rated insulation voltage
U
i
4 kV
Rated impulse withstand
voltage U
imp
Category III
Overvoltage category
32 A fused on the load side,
Rated current of a circuit
fused 6 A on the control side
I
nc
<6 kA
Rated peak withstand
current I
pk
6 A
Rated short-time with-
stand current I
cw
6 A
Rated conditional
short-circuit current I
cc
50/60 Hz
Rated frequency f
n
Pollution degree 3
TN or TT
System according to type
of earth connection
Indoor and outdoor installation
Installation site
Class B
EMC classification
Mechanical impact IK 8
protection
M1
Mechanical ambient
conditions according to
MessEV
E1
Electromagnetic ambient
conditions according to
MessEV
13/18