Reheat Function; Cleaning And Maintenance - Moulinex CE 430832 Manual

come back to the standby mode.We have 1 short beep sound associated with the Start and 1
long beep sound associated with the Stop.
1. It is also possible to stop the cooking with a short press on cancel button.
2. If the product is in stand by mode, a long press on the Start/Stop key will shut down
completely the product , lights and screen will cut out.
If the product is shut off a short press will switch on the product then the product is in stand
by mode.

7. Reheat function

1. You can activate the reheat function by a long press on the « Keep warm / Reheat
functions » key.
2. You can adjust the reheat time with
3. The corresponding indicator will light, and the screen will display the countdown time until
it is finished.
Note : the reheating time needs to be adjusted in function of the type of food (e.g. the time to
reheat chili or similar compact food needs to be increased).

CLEANING AND MAINTENANCE

• It is recommended to clean your appliance after each use. Before cleaning let your appliance
cool down for at least 2 hours. - fig. 22
• Do not immerse the appliance in water or pour water into it, do not put the appliance, cooking
pot or lid into the dishwasher. - fig. 24
• You can wash the accessories in the dishwasher. - fig. 25
• Rinse the pot and dry it off thoroughly. Do not use a scourer as this can damage the non stick
coating in the pot. - fig. 26
• Remove the pressure limit valve to clean it and rinse it under water. - fig. 27
• Clean the housing with a damp cloth. - fig. 28
• Rinse the inside of the lid including the sealing gasket. To clean the gasket separate it from
the lid. To do this, take a hold of the knob on the lid and pull the sealing gasket upwards. Once
clean, place back in their original position. - fig 30
• Remove the condensation collector and clean it thoroughly under water. Place it back in its
original position.
• The float valve should be dismantled by removing the small silicone gasket, then turn the lid
to get the float valve. - fig 32
• The duct cover can be unscrewed to be cleaned, and the duct should be checked regularly to
prevent blockage. - fig. 31
• Press on the internal part of the safety valve spring to check that it is not clogged. - fig. 33
• Once everything is cleaned and perfecly dried, place at their original position.
• Always use the cooking pot provided.
• Do not pour water or food directly into the appliance. If you inadvertently immerse your
appliance in water or spill water directly on the heating element (when the pot is not in place),
take it to your service centre for repair.
• Change the sealing gasket every 2 years.
and then press Start .
EN
27