Advertisement
Quick Links
PROBLEM
Pressing the switch (34), the
machine will not turn on.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.
CAUSE
Circuit switch to position "0".
Power cable disconnected.
Function card damaged.
The touch sensor on the
handle is defective.
Brush motor damaged.
Brush
rotation
switch not pressed.
Function card damaged.
Intake motor damaged.
Suction
unit
switch
pressed.
Recovery tank full.
Aspirator off.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee
rubber
worn.
ENGLISH
FRECCIA 30 E 45_
SOLUTION
Press the power switch.
Connect the cable.
Replace.
Replace.
Replace.
enabling
Press the switch.
Replace.
Replace.
not
Press the switch.
Empty, wash and clean the
tank and the probes.
Start up the aspirator.
Check and if necessary clean
the aspiration tube that con-
nects the squeegee to the re-
covery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades
Replace or turn over the
squeegee rubber blades.
49.0219.00
Advertisement
Related Manuals for Ghibli & Wirbel FRECCIA 30 E 45
Summary of Contents for Ghibli & Wirbel FRECCIA 30 E 45
- Page 1 FRECCIA 30 E 45_ 49.0219.00 PROBLEM CAUSE SOLUTION Pressing the switch (34), the Circuit switch to position “0”. Press the power switch. machine will not turn on. Power cable disconnected. Connect the cable. The brush does not rotate. Function card damaged. Replace.
- Page 2 FRECCIA 30 E 45_ 49.0219.00 PROBLEM CAUSE SOLUTION No water comes out. Tank empty. Fill the tank. Solenoid valve enabling Press the switch. switch not pressed. Tap turned off. Open the tap Filter blocked. Clean the filter. Solenoid valve does not Call the technical support ser- work.
Need help?
Do you have a question about the FRECCIA 30 E 45 and is the answer not in the manual?
Questions and answers