Thermo Scientific STANDARD Series Instructions Manual page 115

System - Password/Reset
circulator reset options, the temperature sensor calibration procedure and displays PID values.
Password/Reset
1. With
to display:
Level
Password
Menu
3. Press to display:
Level
Password
Reset
Calibration
Menu
Note The circulator resets to the
when it is turned off. The circulator also resets to
User
the mode when the Start/Status Display is
displayed continuously for 10 minutes.
Calibration
5. With
to calibrate the internal temperature sensor. The
procedure is covered on the next page,:
Level
Password
Reset
Calibration
Menu
Thermo Scientific
is used only by a qualified technician. Changing the password enables
highlighted, press
User
0
Operator
1
User
mode

highlighted, press
Operator
1
2. Press and change the number to
Level
Password
Menu
4. If desired, highlight
to display:
Reset user settings
Reset PID settings
Reset both
Menu
Highlight the desired reset option and press
A confirmation message will appear, press
again.
The circulator will enter the stand by mode.
6. Scroll down to display
4-16.
Password
Reset
Calibration
PID Tuning
Menu
Section 4 Operation
1
.
User
1
Reset
and press
PID Tuning
, see page
1
.
4-49