Error Codes - Infinity 85 - Gerber Technology GERBERplotter Infinity Series Getting Started Manual

Error Codes – Infinity 85
This table contains the most common error codes that could
appear on your Infinity 85 plotter control panel. Find your
error code and follow the corresponding resolution. If you
need further assistance, contact Gerber Customer Service at
1-800-321-2448.
Error Code
025
Timeout waiting for HP
bulk ink system
026
Bulk Ink Cartridge Failure
027
Gerber Bulk Ink Cartridge
Not Present
028
Bulk Ink Cartridge is
Empty
030
Bulk Ink Cartridge
Removed Without Access
Pens
Resolution
Cycle power switch. If this
problems continues, call Gerber
customer support.
Bulk ink cartridge may not be
properly seated. Reseat cartridge,
then push Access Pens button.
Install a Gerber bulk ink cartridge,
then push Access Pens button.
Install a new Gerber bulk ink
cartridge, then push Access Pens
button.
Reseat bulk cartridge, then press
Access Pens button.
59