Figure 6. Nipbar Stop Installation - Gerber Technology GERBERplotter Infinity Series Getting Started Manual

1

Figure 6. Nipbar Stop Installation

1-M5 x 10 Screws (2 places each stop), 2-Nipbar Stop (2 places)
15. Remove these packing materials if present:
•
plastic wrap securing plotter cover
•
tie wrap securing the drive belt
CAUTION:
16. Manually move the plotter head to the mid-plotter position
to make sure it travels smoothly, but do not manually
move the head into the parking position.
Key to Figure
Do not manually move the head
into the parking position or
damage to the plotter may result.
14
2