INTRODUCTION
General instructions
•
Installation must be performed by experienced and knowledgeable technicians.
•
Consult with your supervisor if problems occur during installation.
•
Do not apply excessive force or pressure on components during installation.
Electricity
•
AC controller only: Ensure that a suitable electrical power supply is available in the vicinity of the
installation for electrical connection of the controller (see
•
An additional electrical socket should be available at the installation site for installation and service.
Components and structure
A media filtration system is comprised of the following components:
Media filter tank
Outlet
manifold
Backwash
controller
Solenoids
Outlet
flange adaptor
Filtration system
control kit
4 SANDSTORM
DOUBLE-CHAMBER INSTALLATION MANUAL
™
Inlet manifold
Air valve
Manifold
support legs
Electricity
Inlet flange adaptor
Grooved coupling
Backwash
manifold
Location of
the tank ports
1
Filling port
2
Service port
connection, page 5).
Backwash 3-way
hydraulic valve
2
Backwash
flange adaptor
Backwash
flow-control
valve
1