4.20 Rear Camera Module
Replacement Procedure
•
Perform sections 2.1 - 2.9 of the Disassembly Procedure.
1. Push on the lens side of the rear camera
module so that the camera module falls out of
its cavity in the board frame.
2. Orient the board frame so that the vibrator is
toward you.
3. Obtain a new camera module and orient it over
its cavity in the board frame so that the end of
the module that has the flex film extending from
it is toward the vibrator.
3/00021-1/FEA 209 544/112 A
Company Internal © Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Working Instruction, Mechanical
63(74)