Table of Contents
Advertisement
If the message on your screen indicates your adapter is DEFINED instead of AVAILABLE, shut down your
machine. Verify that the adapter was installed correctly. Go to Chapter 4, "Installing the 10/100/1000
Base-TX Ethernet PCI-X or Dual Port 10/100/1000 Base-TX PCI-X Adapter," on page 9 and return to
this section and repeat the verification steps.
Note: If the message on your screen indicates your adapter is DEFINED a second time, it may be
necessary to contact your service representative.
If the installed adapter does not appear, continue with "Verify AIX Software Installation" on page 6.
Running Adapter Diagnostics
Diagnostics are provided with the device driver software. If you must run diagnostics, refer to your system
unit documentation for instructions.
10
10/100/1000 Base-TX Ethernet PCI-X and Dual Port 10/100/1000 Base-TX PCI-X Adapters Installation and Using Guide
Advertisement
Table of Contents
