SunStar SWF/B Series User Manual page 121

Pulse Motor –X and Y axis
If you lose X or Y movement, check for green lights on the X and Y boards.
NO. ERROR MESSAGE
200 (+X) Frame Limit Detection
201 (–X) Frame Limit Detection
202 (+Y) Frame Limit Detection
203 (–Y) Frame Limit Detection
204 X Axis Driver Error
205 Y Axis Driver Error
206 Wiper Return Error
MEANING
The frame has reached its +X
limit.
The frame has reached its –X
limit.
The frame has reached its +Y
limit.
The frame has reached its –Y
limit.
An error has occurred in the X
axis driver.
An error has occurred in the Y
axis driver.
Wiper Solenoid did not return.
CORRECTION
Move the frame in the –X
direction
Move the frame in the +X
direction
Move the frame in the –Y
direction
Move the frame in the +Y
direction
Check for green light on front
of X axis board.
Check for green light on front
of Y axis board.
Repair Wiper Mechanism
115