SunStar SWF/B Series User Manual page 115

Use the frame transfer
key to setup X:600, Y:1500. Then
Press
Use the frame transfer key
to setup X:800, Y:2000. Then Press
Press when the operating system loads and is on the screen. The following screen appears:
The set-up of the needle bar determines the automatic color changing functions
and the needle bar changing order. The needle bar changing order (color
changes) can be set from 1-99. When setting the needle bars, if you press (0) the
setting of that needle will be deleted.
NOTICE
===
=> FRAME MOVE
===
=> FRAME MOVE
NEEDLE BAR SELECTION
==== NEEDLE SELECT
[1
[END] [INSERT]
MIDDLE OFFSET
OFFSET POINT
====
]: 1 / 1
[DEL]
===
===
109