Placement And Mounting; Placement; Wall Mounting (If Using Option-B) - Monoprice Dolby Atmos SB-300 Instruction Manual

5. Placement and Mounting

5.1 Placement

A If your TV is placed on a table, you can place
the unit on the table directly in front of the
TV stand, centered with the TV screen.
B If your TV is attached to a wall, you can
mount the unit on the wall directly below the
TV screen.

5.2 Wall Mounting (if using option-B)

- Installation must be carried out by qualified
personnel only. Incorrect assembly can
result in severe personal injury and property
damage (if you intend to install this product
yourself, you must check for installations
such as electrical wiring and plumbing
that may be buried inside the wall). It is the
installer's responsibility to verify that the wall
will safely support the total load of the unit
and wall brackets.
- Additional tools (not included) are required
for the installation.
- Do not overtighten screws.
- Keep this instruction manual for future
reference.
1
2
892 mm
- Use an electronic stud finder to check the
wall type before drilling and mounting.
1. Drill 4 parallel holes (Ø 5.5-6 mm each
according to wall type) in the wall. The
distance between the holes should be 35.1"
(892 mm).
2. Firmly fix 1 dowel into each hole in the wall if
necessary. Tighten the wall mount brackets
on the wall with screws and screwdriver (not
included). Make sure that they are securely
installed.
3. Remove the screws at the back of the unit.
Install the wall mounting screws into the
back of the unit.
4. Lift the unit onto the wall mount brackets
and slot into place.
892 mm
A
Remove
the screws
Install the wall
mounting screws
B
3
4 4
9