wolke m600 Universal Operator's Manual page 66

4
3
2
5
Rev AB
1. Shutdown Status
2. Run (green)
Figure 5-7: CLARiTY Home Page
During SHUTDOWN, the Stop (red) and Run (green) icons (see
Figure 5-7) are disabled (in grey color).
Note: SHUTDOWN means Power is ON to the controller but power is OFF
to the printhead(s).
Note: If the print sensor is activated accidentally, the printer will not operate
because the sensor and encoder input are ignored during the shutdown
status.
When production line and printer are ready for start up, perform the
steps mentioned in "How to Start the Printer" on page 5-30.
Wolke m600 Universal Operator Manual
3. Stop (red)
4. Startup/Shutdown Icon
How to Turn ON the Printer
1
5-7