wolke m600 Universal Operator's Manual page 38

Buttons
Printer Status Bar
Tools Button
Current Job Details Page
Consumables
Information
Print Position
Performance Information
System Control Buttons
Table 4-1: Home Page
Rev AB
Wolke m600 Universal Operator Manual
Description
Provides information about the status of the
printer.
• Running: Printer is on and ready to print
when the proper print trigger is received.
• Offline: Printer is on and not printing.
• Shutdown: Power to the printhead is
disabled and not printing.
• Warning: Conditions exist that the Operator
should be aware of, but do not keep the
system from printing.
• Fault: Conditions exist to keep the system
from printing.
• Allows the user to toggle between offline and
running mode, enabling or disabling printing.
• Allows the user to access the current
warning and fault screens if any present.
Opens the Tools menu when selected.
Displays the information about the current job
and when selected, opens the current job details
screen.
Provides information about the status of the
consumables like printing ink and when selected
opens consumables screen.
Opens the print position menu when selected.
Permits the user to set the product delay
parameters. Product delay is the time between
the start of the product (trigger point) and the
print start position and can be adjusted for the
current job.
Displays the following printer performance
information:
• Throughput: Throughput of the printer in
prints per minute since the current Job was
loaded.
• Batch Count: Number of prints since the
current Job was loaded.
• Total Count: Number of prints over the life of
the controller.
Selecting this area opens the performance page
showing additional statistical information on the
printer throughput.
Permits the user to switch off or switch on the
printer.
Using the Home Page 4-3