Pitney Bowes Epic Manual page 119

Operator Adjustments
2. To change the speed in the Chassis Speed dialog:
Use the mouse to click the Decrease and Increase buttons as needed to modify the chassis
l
speed setting.
OR
Use the mouse to click in the text field above the buttons and type a number to manually adjust
l
the speed.
3. When the desired speed is set, click OK.
Note:
If the speed of the chassis is changed while the system is running, the speed will gradually change after
the new speed values are entered.
Pitney Bowes Epic Select Operator Guide December, 2017 Page 113 of 288