Adjusting The Buffer Chassis Side Guides - Pitney Bowes Epic Manual

Operator Adjustments

Adjusting the Buffer Chassis Side Guides

The buffer chassis side guides are located on the exit side of the buffer and entrance to the chassis. They
guide the material from the buffer to the chassis. Once the chassis side guides have been adjusted, you
can adjust the buffer chassis side guides.
1. Verify the document coming from the input is centered.
2. Open the buffer covers.
3. Align the buffer guide to be slightly inside the chassis side guide, but wide enough for the collation
to fit through. Align them so the buffer guides are approximately 1 mm inside the chassis guides.
Item Description
1 Buffer Chassis Guide
2 Chassis Side Guide
Align Buffer Side Guide with Chassis Side Guides
Pitney Bowes Epic Select Operator Guide December, 2017 Page 105 of 288