Building Instructions - GRAUPNER SKY HERO III Building Instructions

For two-stroke motors of around 7.46 cc capacity
The model requires a four-channel radio control system
Specification
Wingspan approx.
Fuselage length excl. spinner approx.
Wing area approx.
All-up weight according to fittings approx. 2500 g
Longitudinal dihedral approx.
Caution: This model is not a toy!
If you are a beginner to this type of powered model, please ask an experienced
model flyer for help and support. If you attempt to operate the model without knowing
what you are doing you could easily injure yourself or somebody else. Please keep
your safety and well-being in mind at all times.
Important: before you start construction
Even if you have already built a large number of RC models please read right through
these instructions and check all the kit components against the parts list. We have
taken great trouble to keep construction as simple as possible, without making any
compromises in the area of safety.
Check that the radio control system works correctly and at full range before every
flight: switch on the transmitter and the receiving system, but leave the transmitter
aerial collapsed. Walk away from the model, and check that all the control surfaces
work smoothly and immediately at an appropriate distance, and deflect in the correct
"sense" (direction) relative to the stick movements.
If you are a relative beginner to model flying, we recommend that you ask an
experienced model pilot to help you check and test-fly the model.
RC components and linkages must be installed when mentioned in the appropriate
stage of construction. Fitting these parts later will be more difficult, and could even be
impossible.
If you are buying a radio control system for this model, check that the transmitter and
receiver are suitable for model aircraft, and bear the standard type-approval sticker.
Note regarding the film covering
Minor creases or bubbles may develop in the film covering due to major fluctuations
in weather conditions (temperature, humidity etc.); in rare cases you may even find a
slight warp in a component. These minor faults are in the nature of film-covered built-
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler!

Building instructions

SKY HERO III
1540 mm
1200 mm
59 dm²
0 to + 0.5º
22
Order No.
9593
9593.MX
02/2009 Made in Vietnam