Iridium Pilot User Manual page 43

To upload a configuration file from the IBSU firmware upgrade tool:
1. Open the ISU firmware upgrade tool (must be AO11001 or later)
2. Enter the IP address of the ISU to configure
3. Select whether or not to upgrade the ISU's firmware by selecting or deselecting the Upgrade Unit's Firmware
check box. Note that if the ISU's current firmware is older than AO11001 then this must be checked for the
con figuration process to wo rk.
Figure 3.25
4. Check the Upgrade Un it's Con fig ura tio n ch eck bo x.
5. Click on the file browse icon in the Reconfigure Unit box.
6. Select the configuration file from the dialog box.
7. Click Activate .
Iridium Pilot User Manual
39