Section II – GETTING STARTED
2.1 Getting Started
2.2 SIM Installation
Steps
1. Remo ve SIM co ver (retain so mewh er e safe) an d en sure ON/OF F switch is in OFF p ositio n.
2. Insert suitable SIM card an d slid e th e lo cking tab across (see Fig ures 2.1, 2.2, 2.3).
a. Note: If the SIM card is removed or unlocked during operation any voice or data calls will be
termin ated immed iate ly .
3. Po wer o n and replace the SIM co ver.
4. Con nect co mputer/ro u ter via Eth ern e t po rt.
5. Con nect p hones and /o r PBX via RJ11 p orts.
6. Check all co nnectio ns.
Figure 2.1
Figure 2.2
Slide Locking Tab
Insert OpenPort SIM card
Iridium Pilot User Manual
9