3.4 Accessing the Graphics user Interface (GUI)– IBSU Web Pages
To access the IBSU Web Pag es:
1. Connect a PC to the data port on the BDE
2. Open the web browser and in the web browser address window, type: http://192.168.0.1.
Note: The default IP address is assigned to the IBSU at the factory. The IP address can be changed if there are
multiple IBSU's at a single site. If this has been done, then type in the new IP address. To reset the IP address
back to the d efault (192.1 6 8.0.1), p ress the netwo rk reset butto n o n the BDE.
Figure 3.2
Reset button
3. Select "Login" fo r administr a to r level diag no stics. Type in th e usern ame and password specified by Iridium.
Call your Service Pro vid er if lo gin fails.
4. Select the ap propriate lin k:
Select to link to:
• Status
• Counters
• Diagnostics
Note: The information displayed on the web pages is not dynamically updated. To update the information,
refresh the web page from your browser.
19
Iridium Pilot User Manual