Mpu Alarms And Troubleshooting - Abbott Heartmate 3 Patient Manual

POWERING THE SYSTEM:
MPU AL ARMS AND TROUBLESHOOTING
ADVISORY
STATUS SYMBOLS
CHANGING THE ALK ALINE A A BATTERIES
1. Loosen the screw from the rear panel.
3. Place the alkaline AA batteries in the compartment.
32
| Powering the System
ALARM MEANS
Internal fault
Replace MPU batteries
TO RESOLVE ALARM
1. Promptly connect to two fully charged
HeartMate 3™ LVAD 14 V lithium-ion batteries.
2. Call your hospital contact as soon as
possible for diagnosis and instructions.
Replace the AA batteries
in the MPU.
2. Open the battery compartment and pull the red
ribbon to remove the batteries.
4. Close the compartment and tighten the screw.