Table of Contents
Advertisement
To reestablish connection
Close the dialog box.
Entering the forced standby mode
If the controller PC hangs, for example, you can
force Display Controllers and Display Cabinets
into standby mode.
1
Press and hold the power switch on the
Display Controller for at least 5 seconds.
The forced standby mode is entered, and the
POWER indicator lights red.
2
Press and hold the power switch again for
about 2 seconds.
After the POWER indicator blinks red/orange,
the normal standby mode is entered.
The Display Cabinets will also enter the
normal standby mode.
23
Advertisement
Table of Contents
