INNOVAPLAS FIESTA Assembly

FIESTA / OPERA ASSEMBLY WITH CLASSIC LADDER
Contents of Fiesta box # 1001 or Opera # 1016
HARDWARE BAG 140-008
x8 x8 x8 x12 x8 x2
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
Fiesta-Classic shown.
Instructions also compatible for Opera-Classic
370 Lajeunesse St,
St-Jérome (Québec),
Canada J7Y4E5
x4
x2
x2
x2
WARNING
Contents of the ladder box SKU # 6001
HARDWARE BAG 140-004
x2 x2
x2 x2 x18
CABLE LOCK
***PADLOCK REQUIRED
Security strap x2
A
x8 x8 x8 x8
1) Insert the four
posts into the post
ends and secure
them in place with
the screws provided.
2) Insert the platform
over the 2 rear posts.
Do not secure yet.
3) Insert the large
handrails securing them
with the screws
provided.
Sand
x2
x2
x2
x2
Tools Required
A weather resistant padlock is
recommended.
Maximum functional
width is 1/4 inch.
(not included)
(not included)
REV. 11/10/10
PG. 1