INNOVAPLAS Self-Latching Assembly Manual

SELF-LATCHING ASSEMBLY WITH FIESTA
Contents of Self-Latching box SKU # 9600
SCREW BAG 140-016
x4
Security strap
x12 x2
x2 x2
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
370 Lajeunesse St,
St-Jérome (Québec),
Canada J7Y4E5
Contents of Fiesta box # 1001
x2
SCREW BAG 140-008
x2
x2
x8 x8
WARNING
x4
x2
x2
x8 x12 x8 x2
Required tools and supplies
A
x8 x8 x8 x8
1) Insert the four
posts into the post
ends and secure
them in place with
the screws provided.
2) Insert the platform
over the 2 rear posts.
Do not secure yet.
3) Insert the large handrails
securing them with the
screws provided.
Sand
x2
A weather resistant padlock is
recommended.
use small locking
pliers / vice grip or a
wrench 7/16''
(not included)
(not included)
REV: 11/12/10
PG. 1