INNOVAPLAS Lumi-O H2O 7000 Installation Instructions

H2O 7000 WITH DECK KIT 0005
Contents of the H20 SKU # 7000
x2
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer's instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
SCREW BAG 140-0010
x2
x1
x2
WARNING
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
Contents deck kit SKU # 0005
SCREW BAG 140-0011
x2
A
x2
x2
x4
x2
A
A
x4
1) Install the posts in the step as
far as they go and secure in place
with the screws provided.
2) Slide the deck arms over the
posts but do not secure.
Sand
A B
x16 x16
Required tools
Phillips #2
MANUFACTURER WARRANTY
1 year on step and deck kit.
1 year on hardware.
REV. 10/22/2020 PN:
(not included)
(not included)
Phillips bit
PG:1