Connected devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter Android
USB
Note:
To activate the USB settings, connect the USB cable from the i-series 4.0 to another device or PC. Once the i-series detects the external
computer, it will become available in the USB preference settings.
•
Tap USB.
•
From USB Preferences under USE USB FOR choose and tap a feature to enable.
Bluetooth
Note:
Make sure the BT device is on and is discoverable.
•
Tap Connection preferences.
•
Tap Bluetooth.
•
Tap toggle switch to ON
•
Tap + Pair new device.
•
From Available devices screen, tap a device to pair.
•
When a pairing request message appears.
•
Verify the pairing number is the same.
User Manual –i-series 4.0
Settings → Connected devices →
File transfer – This will share i-series 4.0 internal and SD shared storage.
❖
USB tethering – This will share internet network connection.
❖
MIDI - Musical Instrument Digital Interface.
❖
PTP - Picture Transfer Protocol.
❖
No data transfer – (Default Setting) No data will be transferred even if the USB cable is
❖
connected.
.
UM600410 Rev 02 page 24 of 75