Table of Contents
Advertisement
Paper Size: A4, B5, Legal and Letter are supported
Draft mode: By default, it is selected. If more quality print is required, deselect
Draft Mode
Color: Enabled for Inkjet printer
Orientation: Select Portrait/Landscape as per requirements
Note: Margins & Print Range are not working at this time.
Now, setup is ready at Paperless Recorder
7.9.2 Network Printer (LPT1)
Serial printer will print minimum one line and generally used for printing Real time
alarms. Also, it can be used for printing historical data and alarms from Paperless
Recorder. ESCP language supported. So, any printer supporting ESCP like
LQ300+ can be used. LPT1 port of PC can be connected to Serial printer directly.
However, it needs to install Printer driver in PC first and share it for network use
via Ethernet
.
Procedure
Connect Paperless Recorder to PC via Ethernet
Install Printer driver in PC. Share Printer for network use
Connect Printer to PC via LPT1
Power ON Printer
In Paperless Recorder, at Path, select
(Menu)-More-Config-Auto-Print, En-
ter
97
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
