Table of Contents
Advertisement
Total 4 communication banks are available
Each bank can be configured as Either Modbus Serial (232/422/485) or Mod-
bus_TCP (Ethernet)
For ex: If two Paperless Recorders are coming on two different RS485 networks,
then, each bank can be configured for each Recorder, provided two COM ports
are configured in PC to receive data from two different serial networks. You may
use two USB to Serial converters for this application
After completing the bank setup, click "Save" icon
program icon
8.2.13 Ethernet
1. Install Data Acquisition Studio software
2. Set bank properly to Ethernet
3. If Recorder connected to PC via Ethernet, make sure Recorder is set with
User define IP address and domain same as PC
Use Ping instruction from the Dos prompt, make sure Recorder communi-
cating with PC via Ethernet
4. Create a new project in Data Acquisition Studio software and monitor real
time data from Recorder directly from PC
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
and close return to main
E-Mail: office@promesstec.com I Internet: www.promesstec.com
151
Advertisement
Table of Contents
