Table of Contents
Advertisement
Auto Hide: Select 10 Sec or 20 Sec or 30 Sec or 60 Sec to hide the tool bar if user
do not operate recorder via touch screen for set time interval. Select disable if
auto-hide is not required on specific set time
Scan Page:
Idle time: If touch screen is not operative for set idle time, then display pages in
the recorder start scrolling as per defined scan rate. Select 1 to 10 Min. for the idle
time if display scroll feature is required or else select disable.
Scan Rate: This is scroll time for the display pages. Select time interval between 5
sec to 30 sec. This time set is effective only if idle time is enabled selecting time
between 1 to 10 min
LCD:
Brightness: Select level between 0 and 6. 0 is lowest brightness and 6 is for high-
est possible brightness
Screensaver: To prolong the life of the LCD display, it is suggested to set the dis-
play turn-off time in 1, 10, 20, 30, 40, 50 or 60 minutes after the user operates the
recorder. It was initially set 10 minutes for Screensaver from the factory. The
recorder continues to record data while it is in the screen saving mode. The dis-
play turns on again by touch on the LCD screen
Storage: Select internal flash memory or SD card
Custom page:
Allow download via Ethernet: Enable/disable
7.7 Security
7.7.1 Normal
(Menu)-More-Config-select Instrument, then press "Enter"
Path:
Select "Security" = Normal
If the normal security is selected, for different users it needs just to key in a com-
mon password in maximum 18 characters. Once the password has been entered,
the user needs to key in the password whenever Config, Dump, Clear or Operate
soft keys are required. These keys enable the user to do configuration, dump data,
clear data or manually operate the job. For easy access Config, Dump, Clear or
Operate soft keys, the user may ignore the password.
92
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
