Table of Contents
Advertisement
If Recorder is connected on Serial RS-232 or RS-485, then select Mod-
bus_RS232 as shown below. Please select the com port , baud rate as in the
instrument.
8.2.5 How to configure Recorder
Three ways
Touch screen, Software and Storage Media.
8.2.6 Touch Screen
It is possible to configure Recorder directly from Touch screen
Press Menu-Config
Please refer chapter 4 for more details
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
125
Advertisement
Table of Contents
