Table of Contents
Advertisement
Channel: Selects a specific analog input, Math, Counter, Totalizer, External chan-
nels. Select Disable if a specific channel is not required to be displayed.
Color: Selects the color for each pen.
Width: Selects the width of trend, 1-thin, 2-medium, 3-wide.
Low: Defines the low scale for a pen on the display.
High: Defines the high scale for a pen on the display.
Note:
◆
To illustrate the difference between Display Hi, Display Lo and Scale Hi,
Scale Low. Here is a typical example, with input 0-10V, Scale Low=0.00,
Scale Hi=100.00, to have better resolution and vision on Bar, set Display
Lo=0.00, Display Hi=50.00 so that the Bar displays from value 0.00 to 50.00.
◆
The decimal point is defined by Scale Hi and Scale Low, and not by Display
Hi, or Display Lo.
7.2.1 Status Bar
Status Bar: To make it convenient when viewing the status of Digital Input, Digital
Output, Math channel, Totalizer, Counter and AO, the user may enable these
items in the status bar. Status bar shall be displayed at Lower part of the page.
Maximum 10 tags can be displayed in each Status bar. One status bar can be
configured for each page.
Note: Status bar configuration is not common for all the pages. You may define
different setup for status bar in different pages as per your requirements.
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
77
Advertisement
Table of Contents
