Table of Contents
Advertisement
7.1.2 Digital Input
Path:
(Menu)-Config-DI
After entering the Configuration mode, in the Channel, select DI then Press the
"Enter" soft button to get into Digital Input Channel configuration page.
Name: Define the name for the Digital Input Channel. Max 18 characters allowed
for the name.
Description: Define detail description for the channel.
Type: Logic Level
Logic Level: This selection activates digital logic, which is either one or zero with
low frequency which is less than 1Hz.
Pulse Counter: On This selection , we can feed high speed inputs ( high Frequen-
cy , up to 100Hz)
Select Logic Level and press "Enter" key
Events: Maximum 2 events are supported for every digital Input channel. Maxi-
mum two jobs can be configured for each event.
Note: Events will not appear if Logic Level selected as Pulse Counter
57
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
