Table of Contents
Advertisement
Security levels:
0 to 9 levels are supported
9 is the highest authority level, 0 is the lowest
7.8 Demo
The Demo mode is a simulation mode used as a sales tool for demonstration pur-
poses. It was set to simulate AI analog inputs and Math. To start the automatic
demonstration, first enable Demo mode, then turn the power OFF and Power ON
to make it effective. To stop the automatic demonstration and return to real mode
with real inputs, first disable Demo mode, then turn the power off and Power ON.
7.9 Auto-Output
SetUp Printer: It is to configure printer
Select Setup Printer and then press "Enter" soft button
94
promesstec GmbH I Niedersachsenstraße 4 I D- 48465 Schüttorf I Tel.:+49 (0)5923/ 90 229 0 I Fax:+49 (0)5923/ 90 229 29
E-Mail: office@promesstec.com I Internet: www.promesstec.com
Advertisement
Table of Contents
