Kreepy krauly VTX-7 Owner's Manual page 10

3
Build the Ultra Flex Hose
STEP
Start with the male-male hose and twist on a female length.
Keep going until the hose is long enough to reach from
your skimmer box to the far corner of your pool plus around
1.5 metres extra – this will optimise the coverage of your VTX-7.
male
TIP:
make them easier to connect to each other.
4
Attach the 3 Hose Weights
STEP
Starting at the end that connects to the VTX-7, slide the first
weight 2.2m along the hose. Now slide the second weight
1.2m along. Finally, slide the third weight no more than 10cm
from where the hose will connect to the cleaner.
TIP:
only use 2 hose weights.
8
SOC33548 VTX-7 instructions_Art4.indd 8
Wetting the hose ends in your pool will
10cm or less
When using less than 8m of hose,
male female
1.2m
S
S
2.2m
29/09/2015 2:56 pm