Kreepy krauly VTX-7 Owner's Manual page 18

VTX-7 travels around the water
line in only one direction:
• Check that the main body and
swivel head are not out of
alignment. Adjust accordingly.
VTX-7 sticks on the
underwater light:
• The seal could be getting trapped
on the light fitting. Try fitting
your steering adjuster float bar in
position option 3 or 4 (see page 12).
The VTX-7 only climbs part
way up the wall:
• Check the sole isn't worn and
needs replacing.
VTX-7 becomes stuck on the
main drain:
• Fit a main drain cover over the grille.
16
SOC33548 VTX-7 instructions_Art4.indd 16
VTX-7 keeps wedging itself
on the steps:
• Attach a Step Deflector (bumper) –
available from your pool shop. Or,
shorten the pool hose slightly so
the VTX-7 can't reach the steps and
clean the missed area manually.
• Check silicon seal and sole for
damage.
VTX-7 doesn't sit at 45° and
has difficulties attaching to
the pool floor:
• Adjust hose weights closer to or
further away from the machine until
the seal is flat on the pool floor.
• Make sure the bumper strap
is fitted.
• Check for damage to the machine
and missing floats.
29/09/2015 2:56 pm