Kreepy krauly VTX-7 Owner's Manual page 19

You notice bubbles at return
to pool outlets:
• Check if the hose is damaged
by lifting it near the surface and
listening for a hissing sound.
Replace damaged section with a
new section.
• Reprime the pump.
• Check the Auto Skim valve or
Smart-Skim valve isn't jammed.
• Make sure the pool water level is
high enough.
• Check the Auto Skim valve isn't
sitting above the waterline.
If it is, fit an anti-vortex washer
on the valve.
NOTE:
For more detailed troubleshooting advice please don't
hesitate to contact your helpful local dealer, or check our online
resources for tips and other information: www.kreepykrauly.com.au
SOC33548 VTX-7 instructions_Art4.indd 17
VTX-7 is always coming
to the surface of the pool,
possibly drawing in air:
• Check that the Auto Skim valve
or Smart-Skim valve is installed
correctly (see page 7).
• Check that there are no large
leaves blocking the skim valve
and creating excess vacuum.
• Check the hose weights are fitted
correctly and readjust if necessary.
• Check that the steering system is
clean and can move freely.
• Fit your steering adjuster float
bar in position option 3 or 4 (see
page 12) or use extended float bar.
17
29/09/2015 2:56 pm