Page 1
Penton - Nest Of Tables Assembly Instructions - Please keep for future reference 483/0616 Dimensions Width - 64cm Depth - 42cm Height - 46cm Important – Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800 Issue 1 - 15/05/15...
Page 2
Safety and Care Advice Important – Please read these instructions fully before starting assembly Check you have all the This product has been produced We do not components and tools listed on from natural timber; you may recommend the pages 2 and 3. notice some variation in the grain use of power and colour of different component...
Page 3
Components - Panels Please check you have all the panels listed below 5 Small top panel 1 Large top panel (40 x 38cm) (64 x 42cm) 6 Base panel (34 x 32.2cm) 2 Large front frame (44 x 60cm) 7 Small front frame x 2 (36 x 36cm) 3 Large back frame (44 x 60cm)
Page 4
Components - Fittings If you have damaged or missing components, call the Customer Helpline: 03456 400 800 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
Page 5
Assembly Instructions Step 1 Insert dowels into large side frames small side frames base panel Step 2 Assembling larger table. Two people are required for an easier assembly. Caution: Carefully lay the top panel on a soft and clean surface to avoid damaging the product.
Page 6
Assembly Instructions Step 4 Fix assembled frame to the top panel using screws as shown. Attention: Do not over tighten screws Step 5 Place blocks in the positions shown. Then fix them to the frames using screws Important: Before fixing blocks into place it is important to ensure that...
Page 7
Assembly Instructions Step 6 Assembling smaller table. Two people are required for an easier assembly. With help, fit base panel to side frames then fix it using screws Step 7 Caution: Carefully lay the top panel on a soft and clean surface to avoid damaging the product.
Page 8
Assembly Instructions Step 9 Fix assembled frame to the top panel using screws as shown. Attention: Do not over tighten screws Step 10 Fix base panel to the front frames using screws After fixing, carefully stand the product upright. Step 11 Insert smaller table underneath large table.
Need help?
Do you have a question about the Penton 483/0616 and is the answer not in the manual?
Questions and answers