Option
Description
● 0 seconds—enabled by default.
● 5 seconds
● 10 seconds
Full Screen Log
● Enable Full Screen Logo—not enabled
Warnings and
● Prompt on warnings and errors—enabled by default
errors
● Continue on warnings
● Continue on warnings and errors
Manageability
Option
Description
USB provision
Enable USB provision is not selected by default
MEBX Hotkey —
Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
enabled by
● Disabled
default
● Enabled
Default setting: Enabled
Virtualization support screen options
Option
Description
Virtualization
This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
Wireless screen options
Option
Description
Wireless Switch
Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
● WWAN
● GPS (on WWAN Module)
● WLAN
● Bluetooth
All the options are enabled by default.
Wireless Device
Allows you to enable or disable the internal wireless devices.
Enable
● WWAN/GPS
● WLAN
NOTE:
For WLAN enable or disable controls are tied together and they cannot be enabled or disabled
independently.
System setup
69