Chapter 2: Removing And Installing Components; Recommended Tools; Screw Size List - Dell Latitude 7290 Owner's Manual

Removing and installing components
Topics:
•

Recommended tools

•

Screw size list

• Subscriber identification module card
• Base cover
• Battery
• Solid state drive
• Speaker
• Coin cell battery
• WWAN card
• WLAN card
• Memory modules
• Heat sink
• LED board
• Touchpad buttons board
• Power connector port
• Display Assembly
• Touch display panel
• Display Bezel
• Nontouch display panel
• Camera Microphone Module
• Display Hinge Caps
• System board
• Keyboard
• Palm rest
Recommended tools
The procedures in this document require the following tools:
● Phillips #0 screwdriver
● Phillips #1 screwdriver
● Plastic scribe
NOTE: The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
Screw size list
Table 1. Latitude 7290 screw size list
Component M2.5 x 6.0
Back cover 8 (captive
screws)
Battery—3-cell
Battery—4-cell
SSD module
M2.0 x 5.0 M2.5 x 3.5
1
2
M2.0 x 3.0 M2.0 x 2.5
1
Removing and installing components
2
M2.0 x 2.0
9