Post Behavior; Manageability; Virtualization Support - Dell Latitude 5400 Service Manual

POST behavior

Option Description
Adapter Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
Warnings adapters.
Default setting: Enable Adapter Warnings
Numlock Enable Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.
Fn Lock Options
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:
● Fn Lock—enabled by default
● Lock Mode Enable/Secondary—enabled by default
● Lock Mode Disable/Standard
Fastboot Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
● Minimal
● Thorough—enabled by default
● Auto
Extended BIOS Allows you to create an extra preboot delay. The options are:
POST Time
● 0 seconds—enabled by default.
● 5 seconds
● 10 seconds
Full Screen Log ● Enable Full Screen Logo—not enabled
Warnings and ● Prompt on warnings and errors—enabled by default
errors
● Continue on warnings
● Continue on warnings and errors

Manageability

Option Description
Intel AMT Allows you to provision AMT and MEBx Hotkey function is enabled, during the system boot.
Capability
● Disabled
● Enabled - by default
● Restrict MEBx Access
USB Provision When enabled Intel AMT can be provisioned using the local provisioning file via a USB storage device.
● Enable USB Provision - disabled by default
MEBX Hotkey Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
● Enable MEBx hotkey—enabled by default

Virtualization support

Option Description
Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware
capabilities provided by Intel Virtualization Technology.
Enable Intel Virtualization Technology—enabled by default.
VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
provided by Intel® Virtualization technology for direct I/O.
128 BIOS setup