NOTE:
To disconnect the speaker, LED board, coin cell battery and the power connector port cables, use a plastic
scribe to release the cables from the connectors. Do not pull the cable as it may result in breakage
a. speaker cable [1]
b. LED board cable [2]
c. coin cell battery cable [3]
d. touchpad cable and USH board cable [4]
e. power connector port [5]
5. To remove the memory module bracket:
a. Remove the (M2.0 x 3.0) screw that secure memory module bracket to the system board [1].
b. Lift the memory module bracket from the system board [2].
40
Removing and installing components